The Application of the Path Computation Element Architecture to the Determination of a Sequence of Domains in MPLS and GMPLS

Abstract

Computing optimum routes for Label Switched Paths (LSPs) across multiple domains in MPLS Traffic Engineering (MPLS-TE) and GMPLS networks presents a problem because no single point of path computation is aware of all of the links and resources in each domain. A solution may be achieved using the Path Computation Element (PCE) architecture.

Where the sequence of domains is known a priori, various techniques can be employed to derive an optimum path. If the domains are simply connected, or if the preferred points of interconnection are also known, the Per-Domain Path Computation technique can be used. Where there are multiple connections between domains and there is no preference for the choice of points of interconnection, the Backward-Recursive PCE-based Computation (BRPC) procedure can be used to derive an optimal path.

This document examines techniques to establish the optimum path when the sequence of domains is not known in advance. The document shows how the PCE architecture can be extended to allow the optimum sequence of domains to be selected, and the optimum end-to-end path to be derived through the use of a hierarchical relationship between domains. This document is not an Internet Standards Track specification; it is published for informational purposes.

Abstract as published in the RFC, via rfc-editor.org.

What “Informational” means

Published for the general information of the community. It does not define an IETF standard and carries no standards-track status.