Encoding Three Pre-Congestion Notification States in the IP Header Using a Single Diffserv Codepoint

Abstract

The objective of Pre-Congestion Notification (PCN) is to protect the quality of service (QoS) of inelastic flows within a Diffserv domain. The overall rate of PCN-traffic is metered on every link in the PCN- domain, and PCN-packets are appropriately marked when certain configured rates are exceeded. Egress nodes pass information about these PCN-marks to Decision Points that then decide whether to admit or block new flow requests or to terminate some already admitted flows during serious pre-congestion.

This document specifies how PCN-marks are to be encoded into the IP header by reusing the Explicit Congestion Notification (ECN) codepoints within a PCN-domain. The PCN wire protocol for non-IP protocol headers will need to be defined elsewhere. Nonetheless, this document clarifies the PCN encoding for MPLS in an informational appendix. The encoding for IP provides for up to three different PCN marking states using a single Diffserv codepoint (DSCP): not-marked (NM), threshold-marked (ThM), and excess-traffic-marked (ETM). Hence, it is called the 3-in-1 PCN encoding. This document obsoletes RFC 5696. [STANDARDS-TRACK]

Abstract as published in the RFC, via rfc-editor.org.

What “Proposed Standard” means

An entry-level standards-track specification: stable, peer-reviewed and a solid basis for implementation, though it may still evolve before becoming an Internet Standard.