Gateway-Initiated IPv6 Rapid Deployment on IPv4 Infrastructures

Abstract

This document proposes an alternative IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) deployment model to that of RFC 5969. The basic 6rd model allows IPv6 hosts to gain access to IPv6 networks across an IPv4 access network using 6-in-4 tunnels. 6rd requires support by a device (the 6rd customer edge, or 6rd-CE) on the customer site, which must also be assigned an IPv4 address. The alternative model described in this document initiates the 6-in-4 tunnels from an operator-owned Gateway collocated with the operator's IPv4 network edge rather than from customer equipment, and hence is termed "Gateway-initiated 6rd" (GI 6rd). The advantages of this approach are that it requires no modification to customer equipment and avoids assignment of IPv4 addresses to customer equipment. The latter point means less pressure on IPv4 addresses in a high-growth environment. This document is not an Internet Standards Track specification; it is published for informational purposes.

Abstract as published in the RFC, via rfc-editor.org.

What “Informational” means

Published for the general information of the community. It does not define an IETF standard and carries no standards-track status.