Using a Link State Advertisement Options Bit to Prevent Looping in BGP/MPLS IP Virtual Private Networks

Abstract

This document specifies a procedure that deals with a particular issue that may arise when a Service Provider (SP) provides "BGP/MPLS IP VPN" service to a customer and the customer uses OSPFv2 to advertise its routes to the SP. In this situation, a Customer Edge (CE) Router and a Provider Edge (PE) Router are OSPF peers, and customer routes are sent via OSPFv2 from the CE to the PE. The customer routes are converted into BGP routes, and BGP carries them across the backbone to other PE routers. The routes are then converted back to OSPF routes sent via OSPF to other CE routers. As a result of this conversion, some of the information needed to prevent loops may be lost. A procedure is needed to ensure that once a route is sent from a PE to a CE, the route will be ignored by any PE that receives it back from a CE. This document specifies the necessary procedure, using one of the options bits in the LSA (Link State Advertisements) to indicate that an LSA has already been forwarded by a PE and should be ignored by any other PEs that see it. [STANDARDS-TRACK]

Abstract as published in the RFC, via rfc-editor.org.

What “Proposed Standard” means

An entry-level standards-track specification: stable, peer-reviewed and a solid basis for implementation, though it may still evolve before becoming an Internet Standard.