Use of IPsec Transport Mode for Dynamic Routing

Abstract

IPsec can secure the links of a multihop network to protect communication between trusted components, e.g., for a secure virtual network (VN), overlay, or virtual private network (VPN). Virtual links established by IPsec tunnel mode can conflict with routing and forwarding inside VNs because IP routing depends on references to interfaces and next-hop IP addresses. The IPsec tunnel mode specification is ambiguous on this issue, so even compliant implementations cannot be trusted to avoid conflicts. An alternative to tunnel mode uses non-IPsec IPIP encapsulation together with IPsec transport mode, which we call IIPtran. IPIP encapsulation occurs as a separate initial step, as the result of a forwarding lookup of the VN packet. IPsec transport mode processes the resulting (tunneled) IP packet with an SA determined through a security association database (SAD) match on the tunnel header. IIPtran supports dynamic routing inside the VN without changes to the current IPsec architecture. IIPtran demonstrates how to configure any compliant IPsec implementation to avoid the aforementioned conflicts. IIPtran is also compared to several alternative mechanisms for VN routing and their respective impact on IPsec, routing, policy enforcement, and interactions with the Internet Key Exchange (IKE). This memo provides information for the Internet community.

Abstract as published in the RFC, via rfc-editor.org.

What “Informational” means

Published for the general information of the community. It does not define an IETF standard and carries no standards-track status.